notes: 1. specifications are guaranteed when tested as a downconverter in a 50 ohm system from -55 ? c to +100 ? c with the nominal lo powe r . specifications indicated as typical are not guaranteed. 2. noise figure is typically within 0.5 db of conversion loss. 3. conversion loss typically degrades less than 0.5 db at +100 ? c and improves less than 0.5 db at -55 ? c. 4. usable lo drives are up to 2 db below and 3 db above nominal. parameter ssb conversion loss: (2) (3) isolation l o to rf: lo to if: rf to if: input 1 db compression point: input third order intercept point: lo power: (4) t riple balanced mi x er multi-octave band model mm4xxg-1 rf 2.0 to 8.0 ghz lo (ghz) 2.0-8.0 2.0-8.0 2.0-8.0 2.0-8.0 2.0-8.0 2.0-8.0 2.0-8.0 rf (ghz) 2.0-8.0 2.0-8.0 2.0-8.0 2.0-8.0 2.0-8.0 2.0-8.0 if (ghz) 0.01-3.0 0.01- 4 .0 0.01- 4 .0 0.01- 4 .0 0.01- 4 .0 min 16 db 23 db typical 6.3 db 7 .3 db 25 db 25 db 27 db +5 dbm +8 dbm +12 dbm +15 dbm +14 dbm +17 dbm +21 dbm +24 dbm +10 dbm +13 dbm +17 dbm +21 dbm max 8.0 db 9.5 db mm44 mm46 mm47 mm48 mm44 mm46 mm47 mm48 mm44 mm46 mm47 mm48 condition s electrical specifications (1) : drop-in module or w ith sma(f) connectors m = module p = with connectors lo power 4 = +10 dbm 6 = +13 dbm 7 = +17 dbm 8 = +21 dbm all dimensions are in inches and [mm]. outline: g mm4xxg-1 t ypica l p er f o r manc e a t 2 5 ? c model mm4xxg-1 specifications spectrum microwave 2144 franklin drive n.e. palm ba y , fl 32905 ph (888) 553-7531 fax (888) 553-753 2 spectrum microwave 2707 black lake place philadelphia, pa 19154 ph (215) 464-4000 fax (215) 464-4001 ww w .spectrummicrowave.co m rev. 2/26/09
|